Posts for: July, 2015
A “gummy” smile, in which the upper gums are too prominent, is a common condition. There are several causes for gummy smiles — determining which one is the first step to having your appearance changed.
Although perceptions vary from person to person, most dentists agree a gummy smile shows 4 mm or more of gum tissue, and the amount is out of proportion with the length of the crown (the visible tooth). Teeth normally erupt through the gums during childhood and continue development until early adulthood, shrinking back from the tooth until stabilizing in place.
This typically produces a crown length of about 10 mm, with a “width to length” ratio of about 75-85%. But variations can produce differences in the relationship between teeth and gums and the width to length ratio of the teeth. The teeth may appear shorter and the gums more prominent. Worn teeth, caused by aging or grinding habits, may also appear shorter.
If tooth to gum proportionality is normal, then the cause may be upper lip movement. When we smile, muscles cause our lips to retract 6-8 mm from the lip’s resting position. If the amount of movement is greater (meaning the lip is hypermobile), it may show too much of the gums. The upper jaw can also extend too far forward and cause the gums to appear too prominent.
There are a number of ways to improve gummy smiles, depending on the cause. Periodontal plastic surgery known as crown lengthening removes and reshapes excess gum tissue to reveal more of the tooth. Lip hypermobility can be reduced with Botox injections (to paralyze the muscles) or in some cases with surgery to reposition the muscle attachments. Orthognathic surgery can be used to surgically reposition an overextended upper jaw. Other cosmetic enhancements such as orthodontics, bonding or porcelain restorations can also prove effective.
The first step is to obtain an accurate diagnosis for your gummy smile. From there, we can devise the best treatment approach to bring your smile back into a more attractive proportion.
If you would like more information on minimizing a gummy smile, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Gummy Smiles.”
In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?
“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.
How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.
With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.
In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.
While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.
Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”